ABT, Inc. • PO Box 837 • 259 Murdock Road • Troutman, NC 28166
(800) 438-6057 • (704) 528-9806 • Fax: (704) 528-5478

> Interceptor > Components > Frames and Grates

Frame and Grate Series

Based on research conducted with Department of Transportation Hydraulics Engineers from several states, the Interceptor A-67 Frame & Grate Series was developed to provide maximum inlet capacity while maintaining "bicycle safe" openings. Both the one-piece and two-piece designs are 1/2 meter long and incorporate four lateral anchoring lugs to help the grate withstand high-speed highway traffic and snowplow blades. One-piece units are used under most conditions. Channels can be cleaned through the grates with high pressure wash equipment. When open access for cleaning discharge pipes or channels is required, a two-piece unit can be installed. The removable grate's stainless steel latch mechanism is out of the flow line, preventing debris build-up.

Specifications

Material: 65-45-12 Ductile Iron
Load Capacity: exceeds AASHTO H-25 and HS-25 load ratings
Inlet area: 67% or 0.0828 sq. m. per linear meter (0.27 sq. ft/LF)
Slot openings: 3.98 cm (1.57 in) X 10.38 cm (4.09 in)

2542A: Two Piece

2552A: One Piece