ABT, Inc. • PO Box 837 • 259 Murdock Road • Troutman, NC 28166
(800) 438-6057 • (704) 528-9806 • Fax: (704) 528-5478

> Trench Former > TF-14 > Rails/Legs/Ties

Rails/End Rails/No-Float Legs/Cross-Ties

Rails

1-3/4 x 1-3/4 x 3-1/6 in. (45 x 45 x 4.5 mm) structural steel rails are manufactured in five lengths: 8, 6, 4, 3 and 2 ft. (2.4, 1.8, 1.2, 0.9 and 0.6 M) The ends of all the rails are punched to receive the alignment clip and have tabs on which to mount the no-float legs and cross ties. Anchor studs are welded on 11 in. (280 mm ) centers. The selection of rail sizes lets you meet any desired trench layout to within 6 in. (150 mm) without modification. All rail components are available with hot-dip galvanized finish.

Part # 1492 (2 ft.)
Part # 1493 (3 ft.)
Part # 1494 (4 ft.)
Part # 1496 (6 ft.)
Part # 1498 (8 ft.)

No-Float Legs

The seven no-float leg sizes are color coded to match their corresponding form sections for easy installation. This patented feature is at the heart of the Trench Former no-float guarantee. Legs are secured to rails by two 3/4 in. (18 mm) nuts for stability and strength.

End Rails

End rails push onto termination points of trench rails, providing support for adjacent concrete. Alignment clips will also slide onto rails that have been cut during fabrication.

Part # 1498EF

Cross-Ties

Cross-ties ensure the stability of the rails during concrete placement.

Part # 1897TW